Hardware
Your kit contains the following hardware items.
Dev Kit
Power cable with 230V AC EU connector
E27 Light Socket with cable and switch EU
Halogen light bulb 30W E27
USB Cable
Technical Specs
| General | |
|---|---|
Current |
10 A nominal without cooling, 15A nominal with cooling |
Max Current (hardware limit) |
50A |
Operational AC voltage |
up to 230V @ 50/60Hz |
Operational DC voltage |
up to 350V |
Number of Poles |
1P + 1N |
Impulse withstand voltage |
4kV |
Tripping curve |
Programmable |
Metering sampling rate |
14khz per channel |
Temperature Protection |
70C |
| Digitial | |
|---|---|
Microcontroller |
ATSAMD21G18, 32-Bit ARM Cortex M0+ |
Flash Memory |
256 KB |
SRAM |
32 KB |
Max Clock Speed |
48 MHz |
| Connectivity | |
|---|---|
Ports |
USB |
Protocols |
Serial |
Connectors
The following image shows the different connectors.
| The USB port is isolated and able to handle up to 5kV impulses and 1kV(RMS) working isolation. |
| Connector | Description |
|---|---|
Phase In |
Connect Phase In here |
Phase Out |
Connect Phase out here |
Neutral |
Connect Neutral line here to enable Voltage measurements |
USB-C |
Isolated USB-C connector. Supports USB 2.0 only |