Hardware
Your kit contains the following hardware items.
![Dev Kit](_images/dev_kit_raw_opt.jpg)
Dev Kit
![Power cable 230V AC EU connector](_images/power_cable_opt.jpg)
Power cable with 230V AC EU connector
![E27 Light Socket with cable and switch EU](_images/light_socket_opt.jpg)
E27 Light Socket with cable and switch EU
![Halogen light bulb 30W E27](_images/halogen_light_bulb_opt.jpg)
Halogen light bulb 30W E27
![USB Cable](_images/usb_cable_opt.jpg)
USB Cable
Technical Specs
General | |
---|---|
Current |
10 A nominal without cooling, 15A nominal with cooling |
Max Current (hardware limit) |
50A |
Operational AC voltage |
up to 230V @ 50/60Hz |
Operational DC voltage |
up to 350V |
Number of Poles |
1P + 1N |
Impulse withstand voltage |
4kV |
Tripping curve |
Programmable |
Metering sampling rate |
14khz per channel |
Temperature Protection |
70C |
Digitial | |
---|---|
Microcontroller |
ATSAMD21G18, 32-Bit ARM Cortex M0+ |
Flash Memory |
256 KB |
SRAM |
32 KB |
Max Clock Speed |
48 MHz |
Connectivity | |
---|---|
Ports |
USB |
Protocols |
Serial |
Connectors
The following image shows the different connectors.
![dcb ports overview](_images/dcb_ports_overview.png)
The USB port is isolated and able to handle up to 5kV impulses and 1kV(RMS) working isolation. |
Connector | Description |
---|---|
Phase In |
Connect Phase In here |
Phase Out |
Connect Phase out here |
Neutral |
Connect Neutral line here to enable Voltage measurements |
USB-C |
Isolated USB-C connector. Supports USB 2.0 only |